Description

The Pico Automotive Diagnostics Kits work with your PC to measure and test virtually all of the electrical and electronic components and circuits in any modern vehicle including:

• Ignition (primary and secondary)
• Injectors and fuel pumps
• Starter and charging circuits
• Batteries, alternators and starter motors
• Lambda, airflow, ABS and MAP sensors
• Electronic throttle control
• CAN bus, LIN bus and FlexRay

Includes

• (1) MI168 S Hook
• (2) PA038 QuadroPack Telescopic Plastic Case, Clear
• (1) PA150 Toyota branded Carry Case
• (1) PP264 Current Clamp (60A AC/DC) with BNC
• (1) PP408 Fuse Extension Leads
• (1) PP718 Premium Test Leads, 3 meter, set of 4
• (1) PR277 TMS PS4425-12 4-Channel Scope
• (2) TA001 Multimeter Probe, Black
• (2) TA002 Multimeter Probe, Red
• (2) TA003 Small Crocodile Clip, Black
• (2) TA004 Small Crocodile Clip, Red
• (1) TA008 Electronics Acupuncture Probes
• (2) TA157 Battery Cllip 4mm Socket, Red
• (2) TA158 Battery Clip 4mm Socket, Black
• (4) TA161 Flexible Back Pinning Probe, Black
• (4) TA162 Flexible Back Pinning Probe, Red
• (1) TA167 BNC 2000A/200A Current Clamp
• (1) TA197 Jogj Bamdwodtj 10:1 Attenuator
• (1) TA206 Maxi Fuse Extension Lead

Warranty

Two years on scope; one year on accessories

Note:
PC and Power Requirements: Desktop or laptop running windows 7,8, or 10 (recommended)
Powered from PC USB port (USB 3.0 / 3.1 recommended; USB 2.0 compatible).  

Product Specifications

• Bandwidth: 20 MHz (10 MHz on ±50 mV range)
• Channels: 4
• Vertical Resolution : 12 bits
• Enhanced Vertical Resolution: 16 bits
• Accuracy: ±1% of full scale
• Sensitivity: 10 mV/div to 40 V/div
• Input ranges (full scale): ±50 mV to ±200 V in 12 ranges
• Input Characteristics: 1 MΩ in parallel with 24 pF
• Input Type: Floating, BNC connector
• Input Common Mode: 30 V
• Input Coupling: Software selectable AC/DC
• Overvoltage Protection: ±250 V (DC +AC peak) on single input
• Maximum Sampling Rate: 1 Channel in use: 400 MS/s; 2 Channels in use: 200 MS/s; 3 or 4 Channels in use: 100 MS/s
• Maximum Sampling Rate (USB streaming): 20 MS/s (USB 3.0); 10 MS/s (USB 2.0)
• Buffer Memory: 250 M samples
• Waveform Buffer: Up to 10,000 waveforms
• Timebase Ranges: 100 ns/div to 5000 s/div
• Triggers - Source: Any input channel
• Basic Triggers: Auto, repeat, single, none
• Advanced Triggers: Rising edge, falling edge, edge with hysteresis, pulse width, runt puls, dropout, windowed
• Maximum Pre Trigger Delay: Up to 100% of capture length
• Maximum Post Trigger Delay: Up to 4 billion samples
• Spectrum Analyser Frequency Range: DC to 20 MHz
• Spectrum Analyser Display Modes: Magnitude, peak hold, average
• Operating Environment Temperature Range: 0°C to 40°C (15°C to 40°C for quoted accuracy)
• Operating Environment - Humidity: 5% to 80% RH, non-condensing
• Storage Environment: -20°C to +60°C
• Storage Environment - Humidity: 5 to 95% RH, non-condensing
• Dimensions: 190mm x 160mm x 40mm (7.5" x 6.3" 1.6")
• Weight: <900 g (approx 2 lbs)